Westomatic Eco Encore, Technical Manual, Page: 38 / 150

37
CLEAR AUDIT – Address 23
This provision exists to zero all audit parameters (vend totals and cash values).
Once executed the information cannot be retrieved.
To perform an audit reset:
Enter ‘Service’ mode:
1. Enter address 023
2. Press the ‘Vend’ key
3. The LCD will display ‘accept/cancel’
4. Press the ‘Vend’ key to clear the audit or the cancel key to cancel the
operation.
DISPLAY FAULT LOG – Address 24
Entering this address will display the last 99 error codes that have occurred on
the machine. To remove unwanted error codes, a fault log clear (address 25)
should be performed following any fault correction.
CLEAR FAULT LOG – Address 25
To remove unwanted error codes from the fault log:
Enter ‘Service’ mode:
1. Enter address 25
2. Press the ‘Vend’ key
3. The LCD will display ‘accept/cancel’
4. Press the ‘Vend’ key to clear the audit or the cancel key to cancel the
operation.
IRDA INTERFACE – Address 41
0 = Irda Interface off
1 = Irda Interface on
2 = DDCMP Via RS232 Port (Telemetry)
ENABLE SUMMERTIME – Address 42
0 = Manual set up using Extra white key
1 = Automatic set up on the last Sunday of March/October
To set manually:
1. 1. Enter Service mode,
2. Change the time and day if required,
3. Press the Extra White key to Enable BST,
4. Scroll back to ‘Door Open’ to Save.
5. Press ‘Cancel’ to SAVE. ‘SAVE’ will be flashing on the Display.
COLD WATER SYSTEM – Address 44
0 = Carbonator (with ice bath)
1 = DGB Carbonator
2 = ESCOWA Chiller Unit
3 = No Refrigerated Unit