Westomatic Eco Encore, Technical Manual, Page: 37 / 150

36
(Copy)
12. Select READ CONFIG and press enter (Vend button)
13. Accept default AUTO SELECT file name by pressing enter again
14. Confirm the action by pressing Enter
15. Display shows READING…
16. When finished the display returns to the initial 021 setting
17. Operate door switch (power down)
18. Remove SIMM Card and Close door
(Clone) Follow same procedure except at 021 address…
6. Select LOAD CONFIG and press enter ( Vend button )
7. Use scroll buttons (Whipped/Extra White) to pick the appropriate file to
load into the machine
8. Press the ‘Vend’ key to accept and confirm action
9. Display shows WRITING …
10. When finished the display returns to the initial 021 setting
Use the ‘Cancel’ key to scroll back to ‘DOOR OPEN’ message to ensure new
settings are saved to the CPU.
LOAD/READ AUDIT – Address 22
11. Open door and operate door switch (power up)
12. Insert SIMM Card
13. Press the ‘Cancel’ button four times to enter “Service Mode”
14. Enter address 022 and press enter (Vend button)
15. Use Whipped/Extra White button to scroll up and down
(Copy)
16. Select READ AUDIT and press enter (Vend button)
17. Accept default AUTO SELECT file name by pressing enter again
18. Confirm the action by pressing Enter
19. Display shows READING…
20. When finished the display returns to the initial 022 setting
21. Operate door switch (power down)
22. Remove SIMM Card and Close door
(Clone) Follow same procedure except at 022 address…
6. Select LOAD AUDIT and press enter ( Vend button )
7. Use scroll buttons (Whipped/Extra White) to pick the appropriate file to
load into the machine
8. Press the ‘Vend’ key to accept and confirm action
9. Display shows WRITING …
10. When finished the display returns to the initial 022 setting
Use the ‘Cancel’ key to scroll back to ‘DOOR OPEN’ message to ensure new
settings are saved to the CPU.