Westomatic Eco Encore, Technical Manual

Page: 28 / 150

27
8. PROGRAMMING
SERVICE MODE
When you receive your machine no security access is necessary to undertake
any programming tasks. However, a facility exists to incorporate a security
code to inhibit unauthorised access to ‘Service’ mode - the mode necessary for
programming. Refer to Programming Commands section - Address 007.
TO ACCESS SERVICE MODE - WITHOUT SECURITY ACCESS
1. Switch on machine
2. Press the ‘Cancel’ key four times. The external display will show . . .
** SERVICE MODE **
ADDRESS =
. . .
DATA =
TIME
NOTE:
If a security code has been set-up and the ‘service’ mode key is pressed
without first entering the security number, a two-second error bleep will be
sounded by the controller.
TO ACCESS SERVICE MODE - REQUIRING SECURITY ACCESS
1. Switch on machine.
2. Enter your six-digit security code number.
3. Press the ‘Vend’ key.
4. Press the ‘Cancel’ key four times to access ‘service’ mode.
PROGRAMMING PROCEDURE
To set the price of Instant 1:
In ‘
Service ’ mode:-
1. Type Address e.g. 471 – Display will display current price
2. Press the ‘Vend’ key – Price data will flash
3. Type new address parameter e.g. 20
4. Press the ‘Vend’ key
5. Press the ‘Cancel’ key twice to display
SAVING SETTING
PLEASE WAIT