WebEye E10/E104
WebEye E10/E104
User’s Guide
9
CH4 BNC connector
To input video signal through a coaxial cable.
Power connector
To supply power connecting provided SMPS power supply
unit (12V 1.0A)
DB-15 port
To connect external devices such as pan/tilt/zoom
mechanism, sensor, video iris lens, digital device, etc.
RJ-45 Ethernet port
To connect 10 Base-T Ethernet cable.
3) Descriptions on DB-15 port
Pin No.
Pin Name
Description
1, 2
TXD, RXD
To communicate between external devices such as PTZ controller and
WebEye E104. These pins are for devices that satisfy RS-232 standard.
3, 4
S+, S-
To communicate between WebEye E104 and external devices that
satisfies RS-485 standard. They are half-duflex. The ports are used to
connect several PTZ controller s.
5, 14
GND
To ground cables of power, communication, IRIS, etc.
6, 7
I1+, I1-
To connect external devices such as infrared sensors.
8, 9
I2+, I2-
To connect external devices such as infrared sensors.
10, 11
O1+, O1-
To control external electric device. They are 1 pair of SSR (Solid State
Relay) output ports.
12
+12V
To supply power to external devices such as an auto iris driver or a
sensor.
13
IRIS
To transmit video iris signal from WebEye E104 to auto iris lens.
15
EM
To maintain firmware of WebEye E104.
4) Description on LED of Ethernet Port
Yellow LED
: This LED indicates the status of data transmission.
After power is supplied, it is on for the first 4-5 seconds and then
it goes off. And it blinks continuously when a user access
WebEye and WebEye transmits data.
1
T X D
2
R X D
3
S +
4
S -
1 0
O 1 +
5
G N D
1 5
E M
9
I 2 -
8
I 2 +
7
I 1 -
6
I 1 +
1 4
G N D
1 3
I R I S
1 2
+ 1 2 V
1 1
O 1 -
