background image

To install Lenovo Bright Eye camera, do the following:

1

2

3

5

4

[J1]

(2)

(1)

S-1

S-2
S-3

S-4

S-5

Installation Guide for Lenovo Bright Eye Camera (This camera can also be used as a common camera)

J1- Four securing latches on the front side of the 

camera base

There are four securing latches on the front side 
of the camera base. Align the four latches to the 
four slots on the top of computer display.

Embed the four securing latches of the camera 
base into the four slots, and then push the case 
downward until it is locked. After that, the 
camera base is secured onto the display.

Move the camera with the camera bracket 
into the base along the glide rail of the base 
to install the camera.

If the camera is not in use, turn it leftward 
or rightward to hide it.

S-1 Lens roller

 —— used to adjust the pitch 

angle of the lens

S-2 Power LED

 —— used to indicate when 

the computer is powered on

S-3 Lens of the camera
S-4 Camera bracket
S-5 USB cable

 —— used to connect the 

camera to the computer

Note:

Press “Push” to move the camera upward 
and eject the lens to start the camera.
Press “Push” again to move the camera 
downward and hide the lens to shut down 
the camera.

31032935

Bright Eye-test.indd   1

2007.12.27   9:45:03 AM

Reviews: