WebEye E10/E104
WebEye E10/E104
User’s Guide
36
(2) Registration Server Address
This is to configure a server address for registrat ion. The registration server to be used for Dynamic
IP registration should be installed proper S/W, developed by WebGate Inc. If you do not run a
server for IP registration, keep the server ’s name as default figure (webeye.to).
(3) Registration Interval
Dynamic IP address is commonly used on xDSL, ISDN or Cable Modem lines. To maintain
continuous connectivity, user should reset the ‘Registration Interval’ shorter than the default value.
Because an IP is to be changed from time to time, some user may not access by clicking on a
WebEye if actual information on WebEye is changed from the registered IP information on the
dynamic IP registration server.
(4) Add Public List
There are two registration systems. One is to register on a public list and another is on a private list.
Please refer to Article 3) ‘How to find registered WebEye in WebEye Internet homepage’ for more
detailed information.
•
Public List
: This list is open to anyone who accesses WebEye Internet homepage
(
www.webeye.to
).
•
Private List
: This list is not seen to anyone. Even the owner of a WebEye can get the
information on one’s WebEye only without viewing information on other’s WebEye.
(5) Access Token
Access token is a password and it is used when you regis ter your own WebEye on a list ‘User’s
WebEye’ out of all WebEyes on WRS(WebEye Registration Server. Please refer to Article 5) ‘ How
to find registered WebEye in WebEye Internet homepage’ for more detailed information.
5) How to find registered WebEye in WebEye Internet homepage
On WebEye Internet homepage (www.webeye.to), there are menus to find WebEye that is
registered on WRS (WebEye Registration Server).
Private List and Access Token
You should set the access token if you configure your WebEye to register its
information on a private list at WebEye Internet homepage (
www.webeye.to
).
Otherwise you cannot access the private list nor find the information on your WebEye.
Access token is to be set 9 bytes. 9 bytes are equal to 9 English characters.
