WebEye E10/E104
WebEye E10/E104
User’s Guide
67
(Appendix 5)
Upgrading WebEye Firmware
1. Connect WeEye to a PC.
•
Directly connect WebEye to a PC with a crossover cable. This connection is recommended.
•
Connect WebEye to a PC through a HUB with a direct cable.
* This process can also be done on a remote network. However it is not recommended.
Warning
This process is to update WebEye with a new firmware.
Make sure to complete the whole process, since you begin the process. When the
process is completed, ‘User Image Upgrade is complete’ message appears. During the
process, do not give physical shock nor disconnect network and power. Otherwise, your
WebEye can be damaged seriously, which may result inappropriate operation or
operation failure.
If you failed in upgrading WebEye firmware or WebEye does not operate properly after
successful upgrading process, contact WebGate distributor in your area.
Crossover cable
HUB
Direct cable
Local PC
