WebEye E10/E104
WebEye E10/E104
User’s Guide
14
III. WebEye Installation Summary, Connection & Placing
1. Installation Summary
l
Connect Ethernet and Power to WebEye on local network for configuration
l
Install a setup program for WebEye in to a PC on local network
l
Assign an IP address to WebEye and configure administrator’s condition
l
Configure user’s condition
l
Place WebEye for your purpose, and re-connect power and Ethernet
l
Adjust the Focus
2. Connecting
l
Connect Ethernet line to the Ethernet port in the rear.
l
Connect the power supply to a power supply port in the rear .
l
Confirm that the LED of the Ethernet port blinks
3. Placing
l
Place WebEye appropriately for your purpose
* Use a general camera stand or tripod for WebEye.
Warning
WebEye is for indoor use. The built in CCD (charged coupled device) can be damaged permanently
if the camera lens is exposed to direct sunlight. When the WebEye is placed under glaring light, an
iris lens is recommended.
If your application demands prolonged exposure to sunlight, consider using a sun visor.
IV. Installing WebEye Setup Program
l
Insert the WebEye Setup disk.
l
Drag the WebEye Setup icon onto the desktop.
l
Double-click on the icon.
