Watchguard Firebox X1000, User Manual

Page: 79 / 314

User Guide 57
CHAPTER 5
Using Policy
Manager to
Configure Your
Network
Normally, you incorporate the Firebox into your net-
work when you run the QuickSetup Wizard, as
described in “Running the QuickSetup Wizard” on
page 40. However, you can also create a basic configu-
ration file from scratch using several functions in Pol-
icy Manager.
Each of the procedures in this section can also be used
to override any settings you made using the Quick-
Setup Wizard. It is recommended that you follow
these steps in the following order to make sure that all
necessary information is provided (although not all
steps are required in all installations).
•
Starting a new configuration file
• Setting up Firebox interfaces
• Adding secondary networks
• Setting up DNS and WINS servers
• Setting up the Firebox as a DHCP server
• Adding the four basic services to Policy Manager
• Configuring routes