Watchguard Firebox X1000, User Manual

Page: 259 / 314

Creating and Editing Reports
User Guide 237
2
Enter the report name.
The report name will appear in Historical Reports, the
WatchGuard Security Event Processor, and the title of the
output.
3 Use the Log Directory text box to define the location of
log files.
The default location for log files is the \logs subdirectory of the
WatchGuard installation directory.
4
Use the Output Directory text box to define the
location of the output files.
The default location for output files is the \reports subdirectory of
the WatchGuard installation directory.
5
Select the output type: HTML Report, WebTrends
Export, or Text Export.
For more information on output types, see “Exporting Reports”
on page 241.
6
Select the filter.
For more information on filters, see “Using Report Filters” on
page 243.
7
If you selected the HTML output type and you want to
see the main page of the report upon completion, select
the checkbox marked
Execute Browser Upon
Completion .
8
Click the Firebox tab.
9
Enter the Firebox IP address or a unique name. Click
Add .
When typing IP addresses, type the digits and periods in
sequence. Do not use the TAB or arrow key to jump past the
periods. For more information on entering IP addresses, see
“Entering IP addresses” on page 43.
10 Specify report preferences as explained in the
remaining sections in this chapter.
11 When you are done defining report properties, click
OK .
The name of the report appears in the Reports list.