Watchguard Firebox X1000, User Manual

Page: 197 / 314

Configuring SecurID Authentication
User Guide 175
CRYPTOCard. The aliases appear in the From and To
listboxes in the individual services’ Properties dialog
boxes.
On the CRYPTOCard server:
1
Add the IP address of the Firebox where appropriate
according to CRYPTOCard’s instructions.
2
Take the user or group aliases from the service
properties listboxes and add them to the group
information in the CRYPTOCard configuration file.
Only one group can be associated with each user.
For more information, consult the CRYPTOCard server
documentation.
Configuring SecurID Authentication
For SecurID authentication to work, the RADIUS and
ACE/Server servers must first be correctly configured. In
addition, users must have a valid SecurID token and PIN
number. Please see the relevant documentation for these
products.
N
OTE
WatchGuard does not support the third-party program Steel
Belted RADIUS for use with SecurID. You should use the
RADIUS program bundled with the RSA SecurID software.
From Policy Manager:
1 Select Setup => Authentication Servers .
The Authentication Servers dialog box appears.
2 Click the SecurID Server tab.
You might need to use the arrow buttons in the upper-right corner
of the dialog box to bring this tab into view.