Watchguard Firebox X1000, User Manual

Page: 151 / 314

Defining Service Properties
User Guide 129
the service or option you’ve selected. You click the
event name to display and set its properties.
Enter it in the log
When you select this checkbox, an entry appears in
the log file each time someone on the external
network uses the service incorrectly. For example,
if someone attempts to send a packet to an address
other than the host IP address you specified when
defining service properties, the packet is denied
and an entry made in the log file.
Send notification
When you select this checkbox, a notification is
sent every time packets are denied. You set
notification criteria using the WatchGuard Security
Event Processor (WSEP). For more information, see
“Customizing Logging and Notification by Service
or Option” on page 215.
The remaining controls are active when you select the
Send notification checkbox:
Email
Triggers an email message when the event occurs.
Set the email recipient in the
Notification tab of the
WatchGuard Security Event Processor (WSEP) user
interface.
Pager
Triggers an electronic page when the event occurs.
The Firebox must have a PCMCIA modem and be
connected to a phone service to make outgoing
calls. (If the pager is accessible by email, you can
enable notification by email and then enter the
email address of the pager in the appropriate field.)
Popup window
Brings up a window when the event occurs.