WAGO-I/O-SYSTEM 750
Fieldbus Communication 281
750-880, 750-880/025-000 ETHERNET Programmable Fieldbus Controller
Manual
Version 1.0.1
Instance 3 – Internal Port 3
Table 218: Ethernet link (F6
hex
) – Instance 3
Attribute ID Access Name
Data type
Description
Default value
1
Get
Interface Speed
UDINT
Transfer rate
100 (0x64)
2 Get
Interface
Flags
DWORD
Interface
configuration and
status information
3 (0x03) – Link
active (Bit 0),
Full duplex (Bit 1)
3 Get
Physical
Address
ARRAY of 6
UINTs
MAC layer address
MAC ID of the
device
Interface Control STRUCT of: Configuration
of
the
physical interface
-
Control Bits
WORD
Interface
configuration bits
3 (0x03) – Link
active (Bit 0),
Full duplex (Bit 1)
6 Set
Forced Interface
Speed
UINT Baud
rate
100
(0x64)
7 Get
Interface
Type
UINT
Interface
type
1 (0x01) – internal
Port
8 Get
Interface
Status
UINT
Interface status
1 (0x01) – active
9
Get
Admin Status
UINT
Admin status
1 (0x01) – active
10 Get
Interface
Label
SHORT_
STRING
Name of the
interface
„Internal Port 3“
Common Services
Table 219: Ethernet link (F6
hex
) – Common service
Service available
Service code
Class Instance
Service-Name
Description
01
hex
Yes
Yes
Get_Attribute_All
Supplies contents of all attributes
0E
hex
Yes
Yes
Get_Attribute_Single Supplies contents of the appropriate attribute
10
hex
No
Yes
Set_Attribute_Single Modifies an attribute value
Note
Changes with service ”Set_Attribute_Single“ not directly effective!
Attributes (particularly the attributes 6 and 9) which were changed over the
service “Set_Attribute_Single“, become only effective after the next Power-On-
Reset of the controller.
Pos: 111.11 /Alle Serien (Allgemeine Module)/Feldbuskommunikation/EtherNetIP/CouplerController Configuration - Attribute bis ID 46 @ 3\mod_1233827515062_21.doc @ 27176 @ 4 @ 1
