126 Commissioning
WAGO-I/O-SYSTEM
750
750-880, 750-880/025-000 ETHERNET Programmable Fieldbus Controller
Manual
Version 1.0.1
The controller IP can be changed in the network by the DHCP server!
If BootP is not deactivated and an ISDN/DSL router is installed in the network
(factory default setting with DHCP server activated) addresses will be assigned
automatically from the address range for the ISDN/DSL router after a loss of
power (loss of 24 V DC power to controller). As a result, all controllers will be
assigned new IP addresses!
Pos: 80.21.31 /Serie 750 (WAGO-I/O-SYSTEM)/In Betrieb nehmen/Feldbusknoten in Betrieb nehmen/Klicken Sie in der linken Navigationsleiste auf den Link „Port“, um die HTML-Seite für die... @ 4\mod_1239109846656_21.doc @ 30255 @ @ 1
4.
In the left navigation bar click on
Port
to open the HTML page for selecting
a protocol.
Pos: 80.21.32 /Serie 750 (WAGO-I/O-SYSTEM)/Web-based Management-System/Seite Port/Port - Bild (750-881) @ 8\mod_1276862641150_21.doc @ 58156 @ @ 1
Figure 52: WBM page "Port"
Pos: 80.21.33 /Serie 750 (WAGO-I/O-SYSTEM)/In Betrieb nehmen/Feldbusknoten in Betrieb nehmen/Sie erhalten eine Liste aller Protokolle, die der Controller unterstützt. (Controller) @ 4\mod_1239110517375_21.doc @ 30265 @ @ 1
You are shown a list of all the protocols supported by the controller.
Pos: 80.21.34 /Serie 750 (WAGO-I/O-SYSTEM)/In Betrieb nehmen/Feldbusknoten in Betrieb nehmen/BootP deaktivieren (Einstellungen im WBM) @ 4\mod_1239108727859_21.doc @ 30271 @ @ 1
5.
Select the option "
DHCP
" or "
use IP from EEPROM
".
You have now deactivated the BootP protocol.
You can also deactivate any other protocols that you no longer need in the same
manner, or select desired protocols and activate them explicitly.
