manualshive.com logo in svg

Wacker Neuson ET12 02, Operator'S Manual

Share
Download
Wacker Neuson ET12 02 Operator'S Manual Download Page 214

7-36

BA ET18, 20, 24 en*  1.5 * et18_20_24w710.fm

 

7 Maintenance

7.10 Air filter

Important information regarding the air filter

• Store filters in their original packaging and in a dry place.
• Check air filter attachments, air intake hoses and the air filter element 

for damage, and immediately repair or replace them if necessary.

• Check the screws at the induction manifold and the clamps for 

tightness.

Dirt indicator

NOTICE

In order to avoid damage to the diesel engine, bear in mind the following:

►

Replace the air filter elements as soon as the red mark on the dirt 
indicator is displayed.

►

Do not clean air filter elements, replace them.

►

Do not use any damaged air filter elements.

Replace the air filter elements as soon as the red mark 

B

 is on the dirt 

indicator 

A

 is displayed.

• After replacing the air filter elements, press button 

C 

to reset the red 

mark 

B

.

Fig. 263Dirt indicator

A

B

C

Maintenance

Summary of Contents for ET12 02































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands