manualshive.com logo in svg

Wacker Neuson ET12 02, Operator'S Manual

Share
Download
Wacker Neuson ET12 02 Operator'S Manual Download Page 270

9-38

BA ET18, 20, 24 en*  1.5 * et18_20_24t900.fm

 

9 Technical data

Safety instructions – stability table

The values of the stability tables apply to lifting gear applications.

DANGER

Crushing hazard due to tipping over of machine.

Causes serious crushing or injury resulting in death.

►

Do not exceed the weight specified in the stability table.

►

Get informed on the lift capacity of the attachment before using it.

►

If an attachment with load hook or joint rod is installed, the weight of the 
attachment must be subtracted from the weight specified in the table.

►

Use the machine for lifting gear applications only if the mandatory 
lifting gear (for example a load hook) and safety equipment (for 
example optical and acoustic warning devices (safe load indicator), 
stability table, hose burst valve) is installed, functional and enabled.

►

Do not tilt the upper carriage (VDS).

►

Do not retract the telescopic travel gear (option). 

►

Observe chapter 

Safety/Safety instructions regarding lifting gear 

applications

.

NOTICE

If the specified weight is exceeded, danger of damage to property due to 
tipping over of machine.

►

Do not exceed the weight specified in the stability table.

Information

The indications are only approximate values. Attachments, uneven 
ground and soft or bad ground conditions affect lift capacity. The operator 
must take these influences into account.

Summary of Contents for ET12 02































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands