Wacker Neuson ET12 02 Operator'S Manual Download Page 17

Page: 17 / 286

BA ET18, 20, 24 en* 1.5 * Sicherheit_12072013.fm

2-1

Safety

2.1

Safety symbols and signal words

Explanation

The following symbol identifies safety instructions. It is used for alerting
you to potential personal hazards.

DANGER

DANGER identifies a situation causing death or serious injury if it is
not avoided.

Consequences in case of nonobservance.

►

Avoidance of injury or death.

WARNING

WARNING identifies a situation that can cause death or serious
injury if it is not avoided.

Consequences in case of nonobservance.

►

Avoidance of injury or death.

CAUTION

CAUTION identifies a situation that can cause injury if it is not
avoided.

Consequences in case of nonobservance.

►

Avoidance of injury.

NOTICE

NOTICE identifies a situation that causes damage to the machine if it is
not observed.

►

Avoidance of damage to property.

Safety

Summary of Contents for ET12 02































































































































































































































































































Search results

Summary of Contents for ET12 02

Reviews:

Brands by name

Popular brands

Wacker Neuson ET12 02, Operator'S Manual

Search results

Summary of Contents for ET12 02

Reviews:

Brands by name

Popular brands