Wacker Neuson ET12 02, Operator'S Manual

Page: 81 / 286

BA ET18, 20, 24 en* 1.5 * et18_20_24i400.fm
4-21
Putting into operation 4
5. Mounting point for cabin/canopy: B
6. Tighten screws D (M12/10.9) and lock nuts on the left and right to 110
Nm (87 ft.lbs).
7. Install the mirrors in both positions C .
Assembly (black screen)
1. Stop and park the machine. Stop the engine. See “Preparing
lubrication”.
2. Remove all lights and mirrors (option).
3. A minimum 2 persons are required for installing/removing.
4. Mounting point for cabin/canopy:
B
5. Tighten screws D (M10/8.8) and lock nuts on the left and right to 45
Nm (33 ft.lbs).
6. Tighten screws E (M12/8.8) and lock nuts on the left and right to 87 Nm
(64 ft.lbs).
7. Install the mirrors in both positions C .
Fig. 89FOPS mounting point (above on machine)
B
Fig. 90Black/gray FOPS (assembly)
D
E
C