Wacker Neuson ET12 02, Operator'S Manual

Page: 19 / 286

BA ET18, 20, 24 en* 1.5 * Sicherheit_12072013.fm
2-3
Safety 2
2.3 Conduct
Prerequisites for operation
• The machine has been designed and built in accordance with state-of-
the-art standards and the recognized safety regulations.
Nevertheless its use can cause danger to the operator or other
persons, or damage to the machine.
• Store this Operator’s Manual in the place provided for this in or on the
machine. Immediately replace a damaged or illegible Operator’s
Manual and any supplements to it.
• The machine must only be operated in accordance with its designated
use and the instructions set forth in this Operator’s Manual.
• The operator and owner are obligated not to put into operation or
operate a damaged or malfunctioning machine.
- If a damage or malfunction occurs during operation, put the machine
out of operation immediately and secure it against restart.
- Have all malfunctions jeopardizing the safety of the operator or other
persons immediately repaired by an authorized service center.
• Do not put the machine into operation or operate it after an accident;
have it inspected for damage by an authorized service center.
- Have the seat belt replaced by an authorized service center after an
accident, even if there is no visible damage.
- Cabin and protective structures
• Remove all dirt, snow and ice from climbing aids (for example
handholds, footholds, handrails).
• The owner is responsible for requiring the operating and maintenance
personnel to wear protective clothing and equipment as required by the
circumstances.