Wacker Neuson ET12 02, Operator'S Manual

Page: 123 / 286

BA ET18, 20, 24 en* 1.5 * et18_20_24b510.fm
5-19
Operation 5
5. Position the boom as shown in Fig. 142 .
6. Stop the engine, remove the starting key and carry it with you.
7. Raise the control lever base.
8. Wait one minute.
9. Put a piece of wood A against the attachment.
10.Wait one minute.
If the attachment does not move from the piece of wood:
➥
Machine is operational.
If the attachment moves away from the piece of wood:
➥
Stop operation immediately.
➥
Contact a Wacker Neuson service center and have the malfunction
rectified.
Fig. 142Positioning the boom
10 cm (4 in)
Fig. 143Identifying the deviation
A