manualshive.com logo in svg

Wacker Neuson ET12 02, Operator'S Manual

Share
Download
Wacker Neuson ET12 02 Operator'S Manual Download Page 246

9-14

BA ET18, 20, 24 en*  1.5 * et18_20_24t900.fm

 

9 Technical data

9.14 Payload/stability

Safety instructions – lift capacity table

The values of the lift capacity table apply to normal operation (for example 
excavating). 
The values of the stability table apply to lifting gear applications.

DANGER

Crushing hazard due to tipping over of machine.

Causes serious crushing or injury resulting in death.

►

Do not exceed the weight specified in the table (the smallest value 
applies).

►

Get informed on the lift capacity of the attachment before using it.

►

If a bucket or attachment (for example a hammer) is installed, the dead 
weight and the contents of the bucket must be subtracted from the 
weight specified in the table. Pay attention to the density of the load.

NOTICE

If the specified weight is exceeded, danger of damage to property due to 
tipping over of machine.

►

Do not exceed the weight specified in the table (the smallest value 
applies).

Information

The indications are only approximate values. Attachments, uneven 
ground and soft or bad ground conditions affect lift capacity. The operator 
must take these influences into account.

Summary of Contents for ET12 02































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands