Wacker Neuson ET12 02, Operator'S Manual

Page: 102 / 286

4-42
BA ET18, 20, 24 en* 1.5 * et18_20_24i400.fm
4 Putting into operation
Low-load operation
NOTICE
The running behavior of the engine can be negatively affected if it runs at
idling speed or high speed and at less than 20% of the load.
► Run the engine in regular operation at loads of over 20 %.
Possible consequences of low-load operation are:
• Increased lube oil consumption.
• Lube oil in exhaust system, and therefore engine contamination.
• Blue smoke in exhaust gas.
Stopping the engine
NOTICE
Engine damage by stopping the engine after full load.
► In order to stabilize the temperature, let the engine run at idling speed
with no load for at least five minutes, and then shut it off.
Turn the starting key to “ 0 ” and remove it.
Fig. 110Starter
0
1
2
3
P