manualshive.com logo in svg

Wacker Neuson ET12 02, Operator'S Manual

Share
Download
Wacker Neuson ET12 02 Operator'S Manual Download Page 76

4-16

BA ET18, 20, 24 en*  1.5 * et18_20_24i400.fm

 

4 Putting into operation

Adjusting the mirrors

Adjust the mirrors in order to:
• Ensure sufficient visibility from the operator seat onto the job site.
• Ensure maximum visibility to the rear.
• Ensure visibility of the rear left edge of the machine in the left mirror.
• Ensure visibility of the rear right edge of the machine in the right mirror.

Information

Set the machine to drive position before adjusting the mirrors 

– see “Drive 

position” on page 5-3

.

Information

We recommend having the mirrors adjusted by a second person.

Information

Do not make any changes or modifications that impair visibility. Otherwise 
the machine does not meet the requirements for conformity and 
registration.

Fig. 83Adjusting the outside rearview mirrors

Summary of Contents for ET12 02































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands