manualshive.com logo in svg

Wacker Neuson ET12 02, Operator'S Manual

Share
Download
Wacker Neuson ET12 02 Operator'S Manual Download Page 164

5-60

BA ET18, 20, 24 en*  1.5 * et18_20_24b510.fm

 

5 Operation

Tilting the upper carriage (Vertical Digging System) (option)

DANGER

Crushing hazard due to tipping over of machine!

Serious crushing hazard causing death or serious injury.

►

On a slope, position the machine so that the upper carriage is tilted 
toward the slope.

►

Tilt the machine only on firm ground.

►

Perform smooth and slow movements with the machine.

►

Tilt the machine only if it is at a standstill and if the attachment is 
empty.

►

Never turn, lower, or set down the attachments abruptly.

►

Do not extend or retract the boom abruptly.

►

Do not exceed a maximum lateral angle of inclination of 10°.

►

Do not exceed a maximum sloping angle of 15°. 

WARNING

Crushing hazard. Due to tilting the machine in the immediate vicinity 
of walls or parts of buildings.

Danger of serious crushing that can cause death or serious injury.

►

Ensure that no parts of the body protrude outside the machine.

►

All persons must stay clear of the danger zone when tilting the 
machine.

►

Neither access nor leave the machine when it is tilted.

Summary of Contents for ET12 02































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands