Volvo SDLG LG936L Operation & Maintenance Manual Download Page 96

Page: 96 / 130

Operation & Maintenance Manual

──

LG936L Wheel Loader

Yuchai YC6B125-T10 engine: If the oil level is lower than the ”L” line, oil should be added

by the oil adding port; It is a suitable oil level if it is between the “L” and the “H” line.

Weichai TD226B engine: If the oil level is lower than the ”L” line, oil should be added by

the oil adding port; It is a suitable oil level if it is between the “L” and the “H” line.

Dongfeng Cummins 6BT5.9 engine: If the oil level is lower than the adding oil graduation

line, oil should be added by the oil adding port. If it is higher than the oil full graduation line

(FULL), check the problem and solve it. It is a suitable oil level if it is between the adding

oil graduation line and the oil full graduation line (FULL).

Summary of Contents for SDLG LG936L



































































































































Search results

Summary of Contents for SDLG LG936L

Reviews:

Related manuals for SDLG LG936L

Brands by name

Popular brands

Volvo SDLG LG936L, Operation & Maintenance Manual

Search results

Summary of Contents for SDLG LG936L

Reviews:

Related manuals for SDLG LG936L

Brands by name

Popular brands