Operation & Maintenance Manual
──
LG936L Wheel Loader
82
(4)
Dumping Operation
z
When dumping material on to trucks or into freight
yards, raise the lift-arm to the position (forward tilt
to the maximum position) where the bucket does
not touch the carriage or material pole. And
operate working equipment control lever to tilt the
bucket forward to dump. Part or all of the material
can be dumped by the lever control. Act slowly
and gently during dumping to prevent the bucket from striking the ground.
z
If the material sticks onto the bucket, move the working equipment control lever cyclically to
allow the bucket to tilt forward or backward to shake down the material.
z
After dumping, use the bucket to level equipment (if assembled). Rear tilt bucket to level position,
and operate the working equipment control handle to allow the lift arm to lower to prepare for
next operation.
(5)
Pushing Operation
Level the bucket to the ground, and push the
accelerator to move forward. If there is blockage during
moving, raise the lift arm a little and move forward
continuously. When operating the lift arm to lift or
lower, operate the control lever between lifting and
lowering operation.
Never
use the lever at the raising
or lowering position to ensure pushing the bucket
smoothly.
△
!
NOTICE
Watch the torque converter oil temperature gauge all the time
during a pushing operation. If the temperature is too high, stop
the machine to let it cool down and then continue to work.
