Operation & Maintenance Manual
──
LG936L Wheel Loader
85
3.
Please use an anti-alpine storage battery in an anti-alpine area.
z
Follow-up after every working day:
In order to prevent the materials from freezing on the machine which may affect it working the next
day, please do as follows:
1.
Completely clean the silt and water on the machine to prevent silt, water or snow entering the
sealed parts which may freeze or break the sealed parts.
2.
Park the machine on the dry and hard ground. If that is impossible, park the machine on a
wooden board, which can prevent the tires from freezing on the ground.
3.
The capacity of storage battery will obviously go down in cold weather. So cover it or move
the storage battery to a warm place, and install it the next day.
4.
When the temperature is below 0 and there is no antifreeze in coolant
℃
water, please open
the water drain valves located at the bottom of the water tank and the engine. Then drain all
the coolant water in the evaporators of the cooling system and the air-condition system (if
assembled) to prevent cold cracks. If antifreeze is added, please follow the rules on the
nameplate of the antifreeze.
After cold weather:
After the weather is warm, the relative parts should use the proper engine oil, fuel and hydraulic oil
that are appropriate for the temperature.
3.6 Oil and Fuel Supply
3.6.1 Fuel Supply of Engine
Fuel Level Checking
①
△
!
NOTICE
An oil level check must be executed 15 minutes before engaging the
engine, or after stopping the engine.
z
Park the machine on level ground, and put the transmission lever in the
neutral
(“
N
”) position.
Pull the parking brake switch, and put blocks in front and back of tires.
z
Open the side door on the right side of the engine cover.
z
Pull the dipstick out, and wipe it clean with a cloth. Insert the dipstick back, and pull it out again
to check the oil level (at least twice).
