Volvo SDLG LG936L Operation & Maintenance Manual Download Page 76

Page: 76 / 130

Operation & Maintenance Manual

──

LG936L Wheel Loader

Fuse Box (Domestic Type, Pilot Control)

Fuse Box (Mechanical Control)

Fuse Box (Export Type, Pilot Control)

△

NOTICE

Always be sure to close the startup switch before replacing the

fuse .The fuse is used to protect the wiring and cable from burning

out. If the fuse has become corroded by oxidation, or the fuse is

loose in the fuse holder, please replace the fuse.

When replacing the fuse, please replace with a fuse of the same

specification.

1.2.9 Air Conditioning

1.2.9.1

Ⅰ

control panel and is operation (if assembled)

The Appearance of Panel

The panel of air conditioning is on the right operator box.

Operating methods

a) Refrigeration

Summary of Contents for SDLG LG936L



































































































































Search results

Summary of Contents for SDLG LG936L

Reviews:

Related manuals for SDLG LG936L

Brands by name

Popular brands

Volvo SDLG LG936L, Operation & Maintenance Manual

Search results

Summary of Contents for SDLG LG936L

Reviews:

Related manuals for SDLG LG936L

Brands by name

Popular brands