Operation & Maintenance Manual
──
LG936L Wheel Loader
34
8.6 Maintenance While the Engine is Working
Routine maintenance of the machine should never be done while the engine is working. When it is
necessary, please follow the rules below:
z
Assign an operator to sit on the seat to ensure all the
maintenance people can have contact with him so he
can prepare to shut the engine when requested.
z
Never
touch a high temperature part such as tail pipe
and silencer to prevent injury.
z
Be careful if the repair space is near the rotation part.
z
Do not touch any lever (or handle). If necessary to
touch it, warn the others to go to a safe place.
z
Never
let any tool or body part touch the fan leaf or fan belt. Otherwise serious hurt may occur.
z
Do not make adjustments unless fully trained to do so.
8.7 Do Not Let Anything Fall into the Inner Part of the Machine
z
When opening the examination window and the oil filling port of the oil tank, make sure that
nothing (such as nuts, bolts, cotton yarn or tools) falls into the inside of the machine. If it happens,
the machine may be disabled. Pick out the fallen pieces safely.
z
Do not carry any unnecessary tools or parts in your pockets during examination of the machine.
8.8 Cleaning
z
Wear the anti-slide shoes to prevent sliding when cleaning the machine. Wear protective clothes
when using high pressure water to clean the machine.
z
Clean routinely to prevent dirt or mud splashing into the eyes or slippage caused by oil on the
machine.
z
Do not use a flammable scour when cleaning the machine.
z
Shut the engine to clean the inner part of the machine, put all the levers (or handles) in the neutral
position, push the parking brake switch and keep it in the braked position.
z
Do not let water enter an electric part (such as sensor, wire connector) or operator cab. If so, the
