Volvo SDLG LG936L Operation & Maintenance Manual Download Page 103

Page: 103 / 130

Operation & Maintenance Manual

──

LG936L Wheel Loader

3.7.2 During Storage

△

WARNING

Open doors and windows to ensure ventilation and exhaust to allow

of poisonous gas if the antirust is used in the building.

Start the machine once a month so that lubricant can be coated over the surface of the movable parts

and other components surfaces. The battery in storage can be charged at the same time.

Wipe off the grease which has coated the hydraulic cylinder rods before work and operation.

3.7.3 After Storage

Do as follows after long-term storage of machine.

Wipe off the grease coated on the hydraulic cylinder rods.

Add oil and grease to all the requisite positions.

Summary of Contents for SDLG LG936L



































































































































Search results

Summary of Contents for SDLG LG936L

Reviews:

Related manuals for SDLG LG936L

Brands by name

Popular brands

Volvo SDLG LG936L, Operation & Maintenance Manual

Search results

Summary of Contents for SDLG LG936L

Reviews:

Related manuals for SDLG LG936L

Brands by name

Popular brands