Operation & Maintenance Manual
──
LG936L Wheel Loader
64
handle left to the rear tilt position and the control handle is locked. During drawing the
bucket, the control handle returns to the neutral position and place it in the lowering position
when in the set level automatically position. Then the equipment is placed on the ground and
the bucket is in the bucketing position in order to realize the set level automatically function
and increase the efficient of the whole vehicle.
Lock automatically function:
When leveling the ground, place the control handle in the
floating position, and the control handle is locked by the electromagnetic force to realize the
lock automatically; Take the control handle from the floating position, it returns to the
neutral position automatically to increase the efficient of the whole vehicle.
z
Brake Pedal
The Brake Pedal controls the brake of the vehicle. Refer to
1.1 General View of Controls and
Gauges Figure3-1
,
Figure3-2, Figure 3-3
in this chapter.
Do not use the left brake pedal to avoid the drive from being cut off on ramp, if double brake pedal
are provided.
z
Accelerator Pedal
This pedal controls the acceleration of the engine. Refer to
1.1 General View of Controls and
Gauges Figure3-1
,
Figure3-2, Figure 3-3
in this chapter.
The engine speed can be freely regulated between idle and full speed.
z
Parking Brake Switch
This switch is on the right operator box and it is used for the parking brake. Pull this switch to engage
the parking brake. Rotate the switch clockwise and the button springs back to release the parking
brake.
z
Flameout Control Soft Knot
This soft knot is on the cover of the heater which on the right side of the seat. Pull this knot, will put
out an engine flame.
