Operation & Maintenance Manual
──
LG936L Wheel Loader
60
z
Unit Heater Switch (if assembled):
Press the lower button and unit heater will work; press upper button, and unit heater stops
working. When the unit heater or air-condition work, adjust the air outlet in the front or profile of
gauge panel. Adjust wind outlet to clean the frost and blow the warm (cool) wind.
z
Water Spraying Switch:
Press bottom side, the water spraying engine begins working and water is sprayed from the
spraying port of rain wiper to clean the glass of the cab; If loose, the switch will return
automatically to stop spraying.
z
Rear Headlight Switch:
Press bottom side, and low beam of the rear headlight will come on;
Press top side, and the high beam of the rear headlight will come on.
If no side is pressed, no lamp will come on.
z
Front Headlight Switch(if assembled):
Press bottom side, and low beam of the front headlight will come on;
Press top side, and the high beam of the front headlight will come on.
If no side is pressed, no lamp will come on.
z
Front (Rear) Lighting Lamp Switch:
Press bottom side, and the front (rear) lighting lamp will come on; press top side and the lamp
will go off.
z
Back Light Switch(if assembled):
Press bottom side, the back light lamp and the head and tail lights will come on; press top side,
the lamps will go off.
z
Warning Lamp Switch(if assembled):
When this button is pushed down, all the turning lamps will blink for an emergency circumstance,
sending light to warn the other vehicles and passersby. Press the button once again and the button
springs back, so all the turning lamps will stop blinking.
