Operation & Maintenance Manual
──
LG936L Wheel Loader
100
about 20 to 40 If it is lower than this temperature, be sure to warm it up to this temperature
℃
℃
before draining it.
1.8 Check the Oil and Filters
z
After the oil is changed or filters are replaced, check the oil and filters. If large amounts of
metallic particles or impurities are found, consult the maintenance people.
1.9 Fuel Strainer
z
Do not remove the fuel strainer while fueling.
1.10 Oil Changing
z
Change oil in relationship dust-free places to keep impurities out of the oil.
1.11 Welding Guide
z
Turn off the starting switch of the engine and remove the battery cables.
z
Keep the distance between the grounding cable line and welding area more than 1m.
z
Avoid welding near the seal rings and bearings.
z
Never
weld any pipe or tube while has fuel as or oil in them.
1.12 Fire Prevention
z
Clean the parts with inflammable cleaner or light oil. Keep spark or cigarette light away from
them.
1.13 Sealing Part
z
When replacing O-ring or gaskets, clean the clamp faces first, and make sure the O-ring and
gaskets are in the correct assembly position.
1.14 Checking the Frame
z
After a long time of operation in rocky conditions, check for damage of the undercarriage and
loose or damaged between bolts and nuts.
1.15 Attention to Washing Machine
z
Wash machine after complete cooling of the engine.
z
Do not allow water to spray on any electric components.