Operation & Maintenance Manual
──
LG936L Wheel Loader
58
z
Fuel Prefiltration Indicator Lamp:
The lamp will come on when the fuel preliminary filter is
blocked. Please clean it or replace.
1.2.2 Switch
z
Starting Switch
This switch, on the gauge panel, is used for starting or shutting
down the electric system and the engine. Refer to
1.1 General
View of Controls and Gauges Figure3-1, Figure3-2,
Figure3-3
in this chapter.
HEAT Position
This position is used for the pre-heating system if the machine has
the cold-start function.
OFF Position
Insert or remove the key in this position. Turn the key to this position to cut off the electric
power.
ON Position
This position is used to turn on the electric system. Keep the key in this position when the
engine is running.
START Position
This is the engine-start position. Keep the key at this position during starting. After the engine
has started, immediately pull out the key, or it will return to
ON
position automatically.
z
Radio and CD Player (selectable)
This switch is at the right side of the ceiling cab, and for the details please refers to
Radio and
CD Player Assemble & Operation Manual.
Vehicle without radio, the connection of radio is
obligated and further assembly can be carried out by professional workers according to the
z
Turning Switch (selectable)
Push this switch forward, and the left turning lamp lights. Push this switch backward, and the
right turning lamp lights. Refer to
1.1 Control System and the Gauge in the chapter,
Figure3-1, Figure3-2
.
z
Switch Group (if assembled)
Refer to
1.1 Control System and the Gauge Figure 3-3 in this chapter.
The switch
controls lighting, high and low beam and steering light.
Lighting
