94
3
-
6.5 Group
Information
Parameter
Description
The section describes how to set up the MLD Snooping Groups Information. The
"Start from VLAN" and "Group" input fields allow the user to select the starting
point in the MLD Group Table.
Each page shows up to 99 entries from the MLD Group table. The default is
20
and
can be selected through the "Entries Per Page" input field. During the initial visit, the
web page will show the first 20 entries from the beginning of the MLD Group Table.
Web Interface
To display the MLD Snooping Group information in the web interface:
1.
Click Configuration, MLD Snooping, Group Information.
2.
If you want to auto
-
refresh the information, then you need to evoke the
“Auto
-
Refresh”.
3.
Click “Refresh” to refresh a entry of the MLD Snooping Group Information.
4.
Click “ Clear“ to clear the MLD Snooping Groups information.
Figure 3-6.5: The MLD Snooping Groups Information
Navigating the MLD Group Table
Each page shows up to 99 entries from the MLD Group table. The default is 20 and
can be selected through the “Entries Per Page “ input field. During the initial visit,
the web page will show the first 20 entries from the beginning of the MLD Group
Table. The "Start from VLAN" and "Group" input fields allow the user to select the
starting point in the MLD Group Table. Clicking the button will update the displayed
table, starting from that or the next closest.
MLD Group Table Match. In addition, the two input fields will
-
upon a button click
-
assume the value of the first displayed entry to allow continuous refresh with the
same start address. The switch will use the last entry of the currently displayed as a
basis for the next lookup. When the end is reached, the text “No More Entries”
appears. Use the button to start over.
MLD Snooping Information Table Columns
VLAN ID:
VLAN ID of the group.
Groups:
Group address of the group displayed.
Port Members:
Ports under this group.
Auto
-
refresh:
To evoke the auto
-
refresh icon then the device will refresh the log
automatically.
Upper right icon (Refresh, <<, >>):
Click “Refresh” to refresh the IGMP Group Status
manually. Click
“<<”
or
“>>”
to move to the next or previous page.
