153
Parameter
Description
Port:
The port column shows the list of ports for which you can configure GARP
settings. There are 2 types of configuration settings that can be configured on per
port bases.
Timer Values
Application
Attribute Type
GARP Applicant
Timer Values:
To set the GARP
-
join timer, leave timer, and leave all timers. The unit
is micro
-
second.
Three different timers can be configured on this page:
Join Timer:
The default value for
“
Join Timer
”
is 200ms.
Leave Timer:
The range of values for
“
Leave Time
r”
is 600-1000ms. The
default value for
“
Leave Timer
”
is 600ms.
Leave All Timer
:
The default value for
“
Leave All Timer
”
is 10000ms.
Application:
Currently, the only supported application is GVRP.
Attribute Type:
Currently, the only supported Attribute Type is VLAN.
GARP Applicant:
This configuration is used to configure the applicant state machine
behavior for GARP on a particular port locally.
Normal-participant:
In this mode, the applicant state machine will operate
normally in GARP protocol exchanges.
Non-participant:
In this mode, the applicant state machine will not
participate in the protocol operation.
The default configuration is normal participant.
Buttons:
Apply
– Click “Apply” to save changes.
Reset
-
Click “Reset” to undo any changes made locally and revert to
previously saved values.
