95
3
-
6.6 IPV6 SSM
Information
Parameter
Description
The section configures the Entries in the MLDv2 Information Table. The MLDv2
Information Table is sorted first by VLAN ID, by Group, and then by Port No.
Different source addresses belong to the same group are treated as single entry.
Each page shows up to 64 entries from the MLDv2 SSM (Source Specific Multicast)
Information Table. The default is
20
and can be selected through the "Entries Per
Page" input field. During the initial visit, the web page will show the first 20 entries
from the beginning of the MLDv2 Information Table. The "Start from VLAN" and
"
Group" input fields allow the user to select the starting point in the MLDv2
Information Table.
Web Interface
To display the MLDv2 IPv6 SSM Information in the web interface:
1.
Click Configuration, MLD Snooping, IPv6 SSM Information.
2.
If you want to auto
-
refresh the information, then you need to evoke the
“Auto
-
Refresh”
.
3.
Click “Refresh” to refresh a entry of the MLDv2 IPv6 SSM Information.
4.
Click
“<< or >>”
to move to previous or next entry.
Figure 3-6.6: The IPv6 SSM Information
MLDv2 Information Table Columns
VLAN ID:
VLAN ID of the group.
Group:
Group address of the group displayed.
Port:
Switch port number.
Mode:
Indicates the filtering mode maintained per (VLAN ID, port number, Group
Address) basis. It can be either Include or Exclude.
Source Address:
IP Address of the source. Currently, the system limits the total
number of IP source addresses for filtering to be 128.
Type:
Indicates the Type. It can be either Allow or Deny.
