12
Parameter
Description
Model name:
The model name of this device.
System description:
This describes the device. This device is “8 port 10/100/1000
Base
-
T + 2
-
Port TP/(100/1G) SFP Combo PoE L2 Plus Managed Switch”.
Location:
This is the location of the switch (User
-
defined).
Contact:
To easily manage and maintain the device, write down the contact
information of the person you would go to for help. This parameter can be
configured through the device’s user interface or SNMP.
Device name:
The name of the switch (User
-
defined).
System Date:
This shows the system time of the switch. The format is day of week,
month, day, hours: minutes: seconds, year.
System up time:
The time accumulated since this switch is powered up. The format
is day, hour, minute, second.
BIOS version:
The version of the BIOS in this switch.
Firmware version:
The firmware version in this switch.
Hardware
-
Mechanical version:
The version of hardware and mechanical. The figure
before the hyphen is the version of electronic hardware. The one after the hyphen is
the version of mechanical.
Serial number:
The serial number is assigned by the manufacture.
Host IP address:
The IP address of the switch is displayed here.
Subnet Mask:
Displays the IP subnet mask assigned to the device.
Gateway IP Address:
Displays the default gateway IP address assigned to the device
Host MAC address:
This is the Ethernet MAC address of the management agent in
this switch.
Console Baud rate:
Displays the baud rate of RS232 (COM) port.
RAM size:
The size of the RAM in this switch.
Flash size:
The size of the flash memory in this switch.
CPU Load:
Displays the load is measured as averaged over the last 100ms, 1sec and
10 seconds intervals.
Bridge FDB size:
Displays the bridge FDB size information.
Transmit Queue:
Displays the device’s transmit hardware priority queue
information.
Maximum Frame size:
Displays the device’s maximum frame size information.
