119
3
-
9 PoE
3
-
9.1 Configuration
Parameter
Description
Power over Ethernet is used to transmit electrical power to remote devices over
standard Ethernet cable. It could be used to power IP telephones, wireless LAN
access points, and other equipment, where it would be difficult or expensive to
connect the equipment to main power supply.
This page allows the user to inspect and configure the current PoE port settings and
show all PoE Supply Watts
.
Web Interface
To configure Power over Ethernet in the web interface:
1.
Click configuration.
2.
Specify the Reserved Power determined and Power Management Mode.
Specify the PoE or PoE++ and Priority.
3.
Click “Apply”.
Figure 3-9.1: The Power Over Ethernet Configuration
Power Supply Configuration
Primary Power Supply [W]:
The switch can have PoE power supplies. It is used as a
power source. To determine the amount of power the PD may use, the amount of
power the power sources can deliver must be defined.
PoE Power:
The PoE power supply settings will be shown.
Power Allocated for PoE:
The total of maximum power.
