177
3
-
15.11 QCL Status
Parameter
Description
The section configures and shows the QCL status by different QCL users. Each row
describes the QCE that is defined. It is a conflict if a specific QCE is not applied to the
hardware due to hardware limitations. The maximum number of QCEs is 256 on
each switch.
Web Interface
To display the QoS Control List Status in the web interface:
1.
Click Configuration, QoS , QCL Status.
2.
If you want to auto
-
refresh the information, then you need to evoke the
“Auto
-
Refresh”
.
3.
Scroll to select the combined, static, Voice VLAN, and conflict.
4.
To Click the “Refresh” to refresh an entry of the MVR Statistics Information.
Figure 3-15.11: The QoS Control List Status
User:
Indicates the QCL user.
QCE#:
Indicates the index of QCE.
Frame Type:
Indicates the type of frame to look for incoming frames. Possible frame
types are:
Any
: The QCE will match all frame type.
Ethernet
: Only Ethernet frames (with Ether Type 0x600
-
0xFFFF) are
allowed.
LLC
: Only (LLC) frames are allowed
SNAP
: Only (SNAP) frames are allowed.
IPv4
: The QCE will match only IPV4 frames.
IPv6
: The QCE will match only IPV6 frames.
Port:
Indicates the list of ports configured with the QCE.
Action:
Indicates the classification action taken on ingress frame, if parameters
configured are matched with the frame's content.
There are three action fields: Class, DPL, and DSCP.
Class
: Classified QoS Class; if a frame matches the QCE, it will be put in the
queue.
DPL
: Drop Precedence Level; if a frame matches the QCE, then the DP level
will be set to the value displayed under DPL column.
DSCP
: If a frame matches the QCE, then the DSCP will be classified with the
value displayed under DSCP column.
