86
Parameter
Description
Navigating the IGMPv3 Information Table
Each page shows up to 99 entries from the IGMPv3 SSM (Source Specific Multicast)
Information Table. The default is 20. This can be selected through the "entries per
page" input field. During the initial visit, the web page will show the first 20 entries
from the beginning of the IGMPv3 Information Table.
The "Start from VLAN", and "Group" input fields allow the user to select the starting
point in the IGMPv3 Information Table. Clicking the button will update the displayed
table, starting from that or the closest next IGMPv3 Information Table match. In
addition, the two input fields will
-
upon a button click
-
assume the value of the first
displayed entry to allow continuous refresh with the same start address.
The switch will use the last entry of the currently displayed table as a basis for the
next lookup. When the end is reached, the text "No More Entries" appears. Use the
button to start over.
IGMPv3 Information Table Columns
VLAN ID:
VLAN ID of the group.
Group:
Group address of the group displayed.
Port:
Switch port number.
Mode:
Indicates the filtering mode maintained per (VLAN ID, port number, Group
Address) basis. It can be either Include or Exclude.
Source Address:
IP Address of the source. Currently, the system limits the total
number of IP source addresses for filtering to be 128.
Type:
Indicates the Type. It can be either Allow or Deny.
Auto
-
refresh:
To evoke the auto
-
refresh icon, then the device will refresh the log
automatically.
Upper right icon (Refresh, <<, >>):
Click “Refresh” to refresh the IGMP Group Status
manually. Click
“<<”
or
“>>”
to move to the next or previous page.
