Vigitron MAXIINET VI3010, Operational Manual

Page: 177 / 274

176
NOTE: All frame types are explained below:
1. Any: Allow all types of frames.
2. Ethernet: Ethernet Type Valid Ethernet type can have
value within 0x600 - 0xFFFF or 'Any'. The default value is
'Any'.
3. LLC: SSAP Address Valid SSAP (Source Service Access
Point) can vary from 0x00 to 0xFF or 'Any'. The default
value is 'Any'.
DSAP Address Valid DSAP (Destination Service Access
Point) can vary from 0x00 to 0xFF or 'Any'. The default
value is 'Any'.
Control Address Valid Control Address can vary from
0x00 to 0xFF or 'Any'. The default value is 'Any'.
4. SNAP: PID Valid PID (a.k.a Ethernet type) can have value
within 0x00 - 0xFFFF or 'Any'. The default value is 'Any'.
5. IPv4: Protocol IP protocol number: (0 - 255, TCP, or UDP)
or 'Any' Source IP Specific Source IP address in
value/mask format or 'Any'. IP and Mask are in the
format x.y.z.w, where x, y, z, and w are decimal numbers
between 0 and 255. When mask is converted to a 32
- bit
binary string and read from left to right, all bits following
the first zero must also be zero DSCP Diffserv Code Point
value (DSCP): It can be specific value, range of value, or
'Any'. DSCP values are in the range 0
- 63 including BE,
CS1 - CS7, EF, or AF11 - AF43.
IP Fragment IPv4 frame fragmented option: yes|no|any
Sport Source TCP/UDP port: (0 - 65535) or 'Any', specific or port
range applicable for IP protocol UDP/TCP.
Dport Destination TCP/UDP port: (0 - 65535) or 'Any', specific or
port range applicable for IP protocol UDP/TCP.
6.
IPv6: Protocol IP protocol number: (0 - 255, TCP or UDP)
or 'Any'. Source IP IPv6 source address: (a.b.c.d) or
'Any', 32 LS bits.
DSCP Diffserv Code Point value (DSCP): It can be specific value,
range of value or 'Any'. DSCP values are in the range 0
- 63
including BE, CS1 - CS7, EF or AF11 - AF43.
Sport Source TCP/UDP port :( 0 - 65535) or 'Any', specific or port
range applicable for IP protocol UDP/TCP.
Dport Destination TCP/UDP port:(0 - 65535) or 'Any', specific or
port range applicable for IP protocol UDP/TCP.
Action Configuration:
Class QoS Class: "class (0 - 7)", default - basic classification.
DP Valid DP Level can be (0 - 3)", default - basic classification
DSCP Valid dscp value can be (0 - 63, BE, CS1 - CS7, EF or AF11 - AF43).
Buttons:

Apply – Click “Apply” to save changes.

Reset - Click “Reset” to undo any changes made locally and revert to
previously saved values.