164
Parameter
Description
Port:
The logical port for the settings contained in the same row. Click on the port
number in order to configure the shapers.
Shapers (Qn):
Shows "Disabled" or actual queue shaper rate (e.g. "800 Mbps").
Shapers (Port):
Shows "Disabled" or actual port shaper rate (e.g. "800 Mbps").
Scheduler Mode:
Controls whether the scheduler mode is "Strict Priority" or
"Weighted" on this switch port.
Queue Shaper Enable:
Controls whether the queue shaper is enabled for this queue
on this switch port.
Queue Shaper Rate:
Controls the rate for the queue shaper. The default value is “?”.
This value is restricted to?
-
1000000, when the "Unit" is "Kbps". It is restricted to 1
-
?,
when the "Unit" is "Mbps”.
Queue Shaper Unit:
Controls the unit of measure for the queue shaper rate as
"Kbps" or "Mbps". The default value is "Kbps".
Queue Shaper Excess:
Controls whether the queue is allowed to use excess
bandwidth.
