15
Parameter
Description
Clock Source:
Click to choose the clock source for the Vi3010. You can select “Use
local Settings” or “Use NTP Server” for Vi3010 time clock source.
Date and Time Format:
The drop bar is for choose appropriate time format. Three
selections are provided.
YYYY
-
MM
-
DD HH:MM:SS
MM
-
DD
-
YYYY HH:MM:SS
DD
-
MM
-
YYYY HH:MM:SS
24 hours
: The time is always represented in the 24
-
hour system.
12 hours
: The time is always represented in the 12
-
hour system.
Local Time:
Shows the current time of the system. The local time column can only
be filled out or inserted in 24 hours format.
Time Zone Offset:
Provides the time zone offset relative to UTC/GMT. The offset is
given in minutes east of GMT. The valid range is from
-
720 to 720 minutes.
Daylight Saving:
Daylight saving is adopted in some countries. If set, it will adjust the
time lag or advance by the unit of hours, according to the starting date and the
ending date. For example, if you set the daylight saving to be 1 hour. When the time
passes over the starting time, the system time will be increased one hour after one
minute at the time since it passed over. And when the time passes over the ending
time, the system time will be decreased one hour after one minute at the time since
it passed over.
The valid configurable daylight saving time is –5 to +5 step one hour. A zero for this
parameter means it doesn’t have to adjust current time, equivalent to in
-
act daylight
saving. You don’t have to set the starting/ending date. If you set daylight saving to
be non
-
zero, you have to set the starting/ending date as well. Otherwise, the
daylight saving function will not be activated.
Time Set Offset:
Provides the daylight saving time set offset. The offset is given in
minutes east of GMT. The valid range is from 1 to 1440 minutes. The default is 60
minutes.
Daylight Savings Type:
Provides the daylight savings type selection. You can select
“By Dates” or “Recurring” two types for daylight saving type.
From:
To configure the daylight saving start date and time, the format is “YYYY
-
MM
-
DD HH:MM”. The column “HH: MM” can only be set up in 24 hour format.
To:
To configure the daylight saving end date and time, the format is “YYYY
-
MM
-
DD
HH:MM”. The column “HH: MM” can only be set up in 24 hour format.
NOTE:
1.
The
“From” and “To”
display what you set on
the “From” and “To” field information.
2.
The local time column and daylight saving
column will not actively change by the date
time format selection.
