169
3
-
15.7 DSCP
-
Based
QoS
Parameter
Description
The section helps the user configure the basic QoS, DSCP based, QoS Ingress
Classification settings for all switches.
Web Interface
To configure the DSCP –Based QoS Ingress Classification parameters in the web
interface:
1.
Click Configuration, QoS, DSCP
-
Based QoS.
2.
Evoke to enable or disable the DSCP for Trust.
3.
Scroll to select QoS Class and DPL parameters.
4.
Click “Save” to save the setting.
5.
If you want to cancel the setting, click the reset button to revert back to
previously saved values.
Figure 3-15.7: The DSCP-Based QoS Ingress Classification Configuration
DSCP:
Maximum number of supported DSCP values are 64.
Trust:
Click to check if the DSCP value is trusted.
QoS Class:
QoS Class value can be any of (0
-
7) .
DPL:
Drop Precedence Level (0
-
3).
Buttons:
Apply
– Click “Apply” to save changes.
Reset
-
Click “Reset” to undo any changes made locally and revert to
previously saved values.
