67
3
-
4.2 MSTI
Mapping
MSTI Mapping is when you implement a Spanning Tree protocol on the switch that
the bridge instance. The CIST is not available for explicit mapping because it will
receive the VLANs not explicitly mapped. Due to this reason, you need to set the list
of VLANs mapped to the MSTI. The VLANs must be separated with comma and/or
space. A VLAN can only be mapped to one MSTI. An unused MSTI should be left
empty (e.g. not having any VLANs mapped to it).
This section allows the user to inspect and change the current STP MSTI bridge
instance priority configuration.
Web Interface
To configure the Spanning Tree MSTI Mapping parameters in the web interface:
1.
Click Configuration, Spanning Tree, MSTI Mapping.
2.
Specifies the configuration identification parameters in the field. Specifies
the VLANs Mapped blank field.
3.
Click “Save” to save the setting.
4.
If you want to cancel the setting, click the reset button to revert back to
previously saved values.
Figure 3-4.2: The MSTI Configuration
F0
-
00
