248
Parameter
Description
Activate Alternate Image:
Click to use the alternate image. This button may be
disabled, depending on the system state.
Cancel:
Cancel activating the backup image. Navigates away from this page.
Image:
The flash index name of the firmware image. The name of primary
(preferred) image is “image”. The alternate image is named “image.bk”.
Version:
The version of the firmware image.
Date:
The date when the firmware was produced.
NOTE:
1.
In case the active firmware image is the alternate
image, only the "Active Image" table is shown. In
this case, the
“
Activate Alternate Image
”
button is
also disabled.
2.
If the alternate image is active (due to a corruption
of the primary image or manually intervention),
uploading a new firmware image to the device will
automatically use the primary image slot and
activate this.
3.
The firmware version and date information may be
empty for older firmware releases. This does not
constitute an error.
