100
3
-
7.4 Statistics
Parameter
Description
The section describes how to display the MVR detail statistics after the MVR is
configured on the switch. It provides the detail MVR Statistics Information.
Web Interface
To display the MVR Statistics Information in the web interface:
1.
Click Configuration, MVR, Statistics.
2.
If you want to auto
-
refresh the information, then you need to evoke the
“Auto
-
Refresh”
.
3.
To Click the “Refresh” to refresh a entry of the MVR Statistics Information.
4.
Click
“<< or >>”
to move to previous or next entry.
Figure 3-7.4: The MVR Statistics Information
VLAN ID:
The Multicast VLAN ID.
V1 Reports Received:
The number of Received V1 Reports.
V2 Reports Received:
The number of Received V2 Reports.
V3 Reports Received:
The number of Received V3 Reports.
V2 Leaves Received:
The number of Received V2 Leaves.
Auto
-
refresh:
Check “Auto
-
Refresh” so the device can refresh the information
automatically.
Upper right icon (Refresh, <<, >>):
Click “Refresh” to refresh the MVR Group
information manually. Click
“<<”
or
“>>”
to move to the next or previous page.
