226
4
-
6.2 Radius
Overview
Parameter
Description
This section gives an overview of the RADIUS authentication and accounting servers
status to ensure the function works
.
Web Interface
To configure a RADIUS Overview Configuration in the web interface:
1.
Checked
“Auto
-
Refresh”
.
Figure 4-6.2: The RADIUS Authentication Server Status Overview
#:
The RADIUS server number. Click for detailed statistics of this server.
IP Address:
The IP address and UDP port number (in <IP Address>:<UDP Port>
notation) of this server.
Status:
The current state of the server. This field takes one of the following values:
Disabled:
The server is disabled.
Not Ready:
The server is enabled, but the IP communication is not yet up
and running.
Ready:
The server is enabled, the IP communication is up and running and
the RADIUS module is ready to accept access attempts.
Dead (X seconds left):
Access attempts were made to this server, but it did not reply
within the configured timeout. The server has temporarily been disabled, but will
get re
-
enabled when the dead
-
time expires. The number of seconds left before this
occurs is displayed in parentheses. This state is only reachable when more than one
server is enabled.
RADIUS Accounting Servers
#:
The RADIUS server number. Click to navigate to detailed statistics for this server.
IP Address:
The IP address and UDP port number (in <IP Address> :< UDP Port>
notation) of this server.
Status:
The current state of the server. This field takes one of the following values:
