123
3
-
9.3 Power Delay
Parameter
Description
This section allows the user to set the delay time of power providing after device
rebooted
.
Web Interface
To display Power over Ethernet Status in the web interface:
1.
Click Configuration, PoE, and Power delay.
2.
Enable the port to the power device.
3.
Specify the power providing delay time when reboot.
4.
Click “Apply” to apply the change.
NOTE:
There might be a 15 seconds gap between the
delay time and actual time. During this gap, the switch
implements the action of PD detection by PoE and
configuration loading. Meanwhile, the PD process boot
up procedure. Different PD may result in different gap
on delay time.
Figure 3-9.3: The POE Power Delay
Port:
This is the logical port number for this row.
Delay Mode:
Turn on/off the power delay function.
Delay Time (0~300sec):
When rebooting, the PoE port will start to provide power to
the PD when it out of delay time.
Button:
Apply
-
Click “Apply” to apply the change.
